View Single Post
Ken911 Ken911 is offline
Registered User
 
Ken911's Avatar
 
Join Date: May 2005
Location: Loxahatchee, florida
Posts: 2,480
Quote:
Originally Posted by JFairman View Post
You could cut the studs you have shorter with a cut of wheel on a die grinder and then smooth off the sharp edge.
Also, if you still have your CIS stuff sitting around the air flow meter housing has two short 8mm studs in it over on the right side down below the fuel head that hold the steel bracket on for the single 8mm mounting nut on the bottom of the stock air cleaner housing.
They are about 1.1" long and may be too short.
No i'll just put in shorter studs i have several sets of different lengths already. I bought a bunch from belmetric a while back.
__________________
88 turbo Guards red Targa slant nose, and yes I am a horsepower junkie, 3.4liter,7.5 to 1 JE pistons, Adjustable WUR, Imagine fuel head, 1 bar waste gate headers,allthe cis toys. Now apart to become the next EFI monster. fabbing my own intake, headers Individual throttle bodies, MS-3, pauter rods, Xtreme twin plugged heads, gt-2 evo cams cop's.
05 Cayenne S lapis blue
Old 05-09-2014, 02:30 PM
  Pelican Parts Technical Article Directory    Reply With Quote #283 (permalink)