View Single Post
wgwollet wgwollet is offline
Registered User
 
Join Date: Jul 2008
Posts: 1,035
Garage
Wow...back to ignition switched. The simple test is fuse #12 in the truck (count from the front of the car) should be 12 v when the ignition is on. Mine was 0 volts, the fuse sends power to the rear main connector to power up the CDI. My CDI never got 12 v with ignition on, so checked voltage at fuse #12. Since no voltage at #12 I jumped a wire from fuse #11, this then powered the CDI.

Remember some voltage is switched on by the ignition switch...when the ignition switch is bad no voltage is sent to the switched powered, like power mirrors or windows, or CDI, radio, etc..
Old 05-26-2014, 08:39 AM
  Pelican Parts Technical Article Directory    Reply With Quote #31 (permalink)