View Single Post
RarlyL8 RarlyL8 is offline
Crotchety Old Bastard
RarlyL8's Avatar
Join Date: Jan 2000
Location: Huntsville, AL
Posts: 13,614
I'm going to guess that your WUR is only modified for cold control pressure adjustment. BL used different hardware for his mods, that one looks similar to what we used to do.
I did not address the presence of boost when cruising down the highway due to your altitude. I have no experience with it so cannot comment but to say my engine runs ~12inHG vacuum at 70mph on flat ground.
Specs for the -112 WUR are as follows:
> Pump Delivery Rate 1500ml / 30 seconds
> System Pressure 6.2-6.4 bar
> CCP 1.2-1.6 bar @ 20C
> WCP 3.65 +/- 0.2 bar
RarlyL8 Motorsports / M&K Exhaust - 911/930 Exhaust Systems, Turbos, TiAL, CIS Mods/Rebuilds
'78 911SC Widebody, 930 engine, 915 Tranny, K27, SC Cams, RL8 Headers & GT3 Muffler. 350whp @ 0.75bar
Brian B. (256)536-9977 Service@MKExhaust Brian@RarlyL8
Old 05-29-2014, 06:01 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)