View Single Post
gumba gumba is offline
Registered User
 
gumba's Avatar
 
Join Date: Dec 2001
Posts: 3,585
I went with the K&N RU-5163. I did a few mods to it. I cut the rubber lip off the bottom, drilled 2 holes through the top and used long 6mm bolts going to the stock holes. Had to crush a small section of the air cleaner to clear the adjustment screw. Also mounted a L fitting to the top for the WUR hose.
For the i/c I made an aluminum frame with a rubber lip that slightly presses into the grill. I figure this would at least keep the air going into the i/c instead of washing over the top and down the sides. Now if it actually does anything, I don't know.
__________________
Harold
'79 930/DP935
Old 06-10-2014, 06:59 AM
  Pelican Parts Technical Article Directory    Reply With Quote #13 (permalink)