Thread: Oil cooler fan
View Single Post
gumba gumba is offline
Registered User
 
gumba's Avatar
 
Join Date: Dec 2001
Posts: 3,585
One of the most effective things you can do is enclose the front of the cooler and feed air into it through a modified turn sign housing, or an inlet in the spoiler.
I made a f/g enclosure for the front of the coolers. Modified my turn signal housings so all the air coming in goes into the cooler. In my case the top inlet is for the turn signal housing and the lower inlet is for the spoiler inlets. By not inclosing the front of the cooler some percentage of air will wash over the cooler. I run dual Carrera coolers with no engine cooler on our na3.4.
__________________
Harold
'79 930/DP935
Old 07-01-2014, 05:48 PM
  Pelican Parts Technical Article Directory    Reply With Quote #4 (permalink)