View Single Post
T77911S T77911S is offline
Registered User
 
T77911S's Avatar
 
Join Date: Oct 2006
Location: MYR S.C.
Posts: 13,535
i might consider it for $30-$40. i would also just replace the shim. pulling the center barrell out that the pin goes in is just asking for more trouble. IMO.
if i put the kit in and i still had running problems i would always wonder if the head needed to be calibrated for fuel flow.
i think the head needs to be calibrated for a certain amount of fuel flow for a given movement of the center pin. the ports also need to be balanced.
i have checked the balance on my head and it was not too bad. i did do a minor adjustment on one port. its such a pain in the rear end to do with hard lines. having to deal with fuel leaks and fuel smell is not worth it.

i am sending mine to flow tech in a few months. i still get VERY odd AFR's depending on what gear i am in, the RPM and where the mixtrure screw is set.
__________________
86 930 42kmiles [__] RUNNING:[__] NOT RUNNING: ____77 911S widebody: SOLD
88 BMW 325is 200K+ SOLD
05 BMW 330CI 130K:: [__] RUNNING: [__] NOT RUNNING:
08 VOLVO V70 190K:: [__] RUNNING: [__] NOT RUNNING:
90 B2200[__] RUNNING:[] NOT RUNNING:__2000 MER E320 WAGON [] WRECKED:[]RUNNING:
Old 10-16-2014, 02:21 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)