View Single Post
kenikh kenikh is offline
3 restos WIP = psycho
kenikh's Avatar
Join Date: Feb 2005
Location: North of Exit 17
Posts: 7,729
For those interested in Electromotive compatibility and testing, I'm taking this on. I picked up a #2 block, based on Steve's recommendation, then will reach out to the Electromotive technical team to see if/how they can help. I've had good luck with then in the past...we needed some customized code in the firmware for knock control a few years back and they were very helpful and responsive.

Here's my plan:

1. My motor is just being completed and should be ready to run in the next 30 days.
2. The motor will be tuned using a Leask adjustable WUR as a baseline, with the Tec3R running spark/knock/boost control.
3. Once running, we'll start on the FrankenCIS block.
4. In the interim, I'll check all of the available outputs on the Tec3r for spec compatibility
5. I'll talk to Uwe at electromotive and see what needs to be done to get the FrankenCIS operational.

I'll keep you all posted.

- 1965 911
- 1969 911S
- 1980 911SC Targa
- 1979 930
Old 11-30-2014, 06:47 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #228 (permalink)