View Single Post
Reanimotion Reanimotion is offline
umop apisdn
 
Join Date: Jun 2014
Location: Brisbane, Australia
Posts: 441
From what we understand of the Factory WUR operation the electrical heater on the bimetal strip is the primary, our tests bringing it to full warm pressure in approximately 2 minutes. The temp sensor is really only required to stop the system from starting the curve again on a warm startup like the WUR would, so reaction speed is not an issue.

Having said that, I'm using a proper coolant temp sensor, and would also prefer to be measuring oil temp if mine was air cooled.
__________________
Steve
1981 928S 4.7 ROW with KE3-Jetronic and Franken8 (AEM Inifinty) follow at [http://www.frankencis.com/Activity-Feed/userid/2]
Yes! mechanical/hydraulic constant flow injection can be managed by a modern EMS

www.FrankenCIS.com
Old 12-09-2014, 07:04 AM
  Pelican Parts Technical Article Directory    Reply With Quote #245 (permalink)