View Single Post
JFairman JFairman is offline
Registered User
 
Join Date: Jul 2006
Location: S. Florida
Posts: 7,289
Put a magnetic angle finder (digital ones are best) on the top edge of the spring plates and make sure they are at the same angle while they are disconnected from the trailing arms and the rear sway bar drop links are also disconnected from them.
Reindex the spring plate splines until they are the same if they are not.

To change them just a little try going 4 splines in one direction on one end and 3 splines in the other direction on the other end... or something like that. It's been a while since I did it and it takes some hit and miss experimentation.
Old 12-10-2014, 07:03 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #9 (permalink)