View Single Post
Reanimotion Reanimotion is offline
umop apisdn
Join Date: Jun 2014
Location: Brisbane, Australia
Posts: 501
Yes, we believe so

there are 6 cylinder units which might be usable and the external regulator is needed as well
The little interface board attaches to the MicroSquirt and converts the two injector outputs to the correct signals for the DPR (Differential Pressure Regulator) or EHA (Electro-Hydraulic Actuator)
This is the only change to the electronics from the WUR version and means the system could be swapped back and forth if needed.
The VW/Audi/Mercedes market kept CIS in play longer than Porsche and therefore benefitted from the continued development of the system.

below is from a Mercedes W124 300E and shows the regulator on the side
0438101012 is the bosch #
1981 928S 4.7 ROW with KE3-Jetronic and Franken8 (AEM Inifinty) follow at []
Yes! mechanical/hydraulic constant flow injection can be managed by a modern EMS
Old 01-06-2015, 02:16 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #255 (permalink)