View Single Post
Reanimotion Reanimotion is offline
umop apisdn
 
Join Date: Jun 2014
Location: Brisbane, Australia
Posts: 441
Well after trying 1001 things that didn't work, I've had a little CNC plate made up to finish the heater plumbing at the back of the cylinder head.

The original 16mm pipe occupied the same space as the air plate sensor and shaft so one of them had to go. This means I can now finalise assembly and start the car again for tuning FINALLY

__________________
Steve
1981 928S 4.7 ROW with KE3-Jetronic and Franken8 (AEM Inifinty) follow at [http://www.frankencis.com/Activity-Feed/userid/2]
Yes! mechanical/hydraulic constant flow injection can be managed by a modern EMS

www.FrankenCIS.com

Last edited by Reanimotion; 03-19-2015 at 05:03 AM..
Old 03-18-2015, 09:50 PM
  Pelican Parts Technical Article Directory    Reply With Quote #335 (permalink)