View Single Post
boosted79 boosted79 is offline
Registered User
 
Join Date: Jan 2015
Posts: 1,263
"Boosted...I doubt the lever was repositioned incorrectly since Jeff achieved 1mm gap."

The 1mm gap can be obtained with different positions of the arm on the shaft by using the adjusting bolt and the cable adjustment. There is a correct position of the arm on the shaft, it needs to be verified. Since he had problems before this clutch change a condition that existed before and after is most likely the problem.
Old 05-16-2015, 06:12 AM
  Pelican Parts Technical Article Directory    Reply With Quote #71 (permalink)