View Single Post
boosted79 boosted79 is offline
Registered User
 
Join Date: Jan 2015
Posts: 1,263
" I did try moving the lever one spline, but this is the only spline that will allow the levers to work at all (I tried). One closer will have the levers overlapping and one further away and the stop bolt isn't long enough to touch the lever. So it cant be that."

When you move the fork arm one spline closer you have to back out the bolt and adjust the clutch cable to move the large arm away from the small arm to get the free play you need. Did you do that? there is plenty of adjustment available between the bolt and the cable adjustment. Look at the pic that Chris put up. I can clearly see two ribs on the diff case between the spring attachment boss and the fork arm. On your car one rib is covered up by the fork arm which indicates your fork arm is closer to the spring attachment boss.
Old 05-28-2015, 07:40 PM
  Pelican Parts Technical Article Directory    Reply With Quote #129 (permalink)