View Single Post
boosted79 boosted79 is offline
Registered User
 
Join Date: Jan 2015
Posts: 1,264
If you or a friend has a welder do this. Drill out the hole in the stand sleeve and the adapter sleeve so a 1/2 bolt will fit thru it. Take a 1/2" nut and weld it on top of the hole in the stand sleeve. Then take a 1/2 Gr. 8 bolt and grind the end to a flat point. Thread it into the nut and you can lock the engine into any position you want to by tightening it against the yoke shaft.
Old 11-27-2015, 05:28 PM
  Pelican Parts Technical Article Directory    Reply With Quote #3 (permalink)