View Single Post
flat6pilot flat6pilot is offline
Registered User
 
flat6pilot's Avatar
 
Join Date: Jul 2007
Location: Bonney Lake, Wa
Posts: 774
Garage
Quote:
Originally Posted by gavinc69 View Post
I also need to connect the EFI injector harness.
I'll connect the Red wire to the switched positive on the small rear fuse box on the car with a 20A fuse in line as per Bitzracing manual.
And I take it the white wires to to pin out no.9 and no.10 on the MS ECU, but is there any particular way round or is it any white wire to either pin out
If I recall, it doesn't matter. Luckily I didn't make any wiring mistakes and she fired right up the first time. Tony did a great job with the drawings for our 911's.
__________________
-Kyle
* 1980 911SC - 3.0l R.o.W 8.6:1 w/ Garrett 30R turbo conversion (.5 bar), Bitz MS-II EFI, Carerra intake, Zork tube, 2300lbs, 360whp
Old 02-14-2016, 01:30 PM
  Pelican Parts Technical Article Directory    Reply With Quote #269 (permalink)