View Single Post
boosted79 boosted79 is offline
Registered User
Join Date: Jan 2015
Posts: 1,337
Crank is at the shop for magnaflux and polishing, I had them record all the original journal diameters to compare to my measurements. Cylinders 2 & 5 are on the way to US Chrome for new Nicasil and hone to std. Heads are on the way to cgarr. I have one squirter that's stuck open so I need to try some MEK on it or replace it. I'm in the process of upgrading my air system right now by adding a 2nd motor/pump to run parallel with the existing 5hp into the same 60 gal tank, should give me 20-21 SCFM @ 90. I got tired of the blaster outrunning the compressor. I'm also adding a cyclone separator so I don't have to clean the shop vac filter every couple hours.

Last edited by boosted79; 03-12-2016 at 07:14 AM..
Old 03-12-2016, 05:51 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #41 (permalink)