View Single Post
gavinc69 gavinc69 is offline
Registered User
gavinc69's Avatar
Join Date: Jul 2008
Location: Bournemouth UK
Posts: 1,008
Finished fitting the intercooler and air filter on.

Uploaded the TunerStudio settings to the ECU ok.

Car won't start

It swings over fine and does try to catch but doesn't and does this over and over again.

There is fuel pressure (2.5bar)

It kind of sounds like no fuel or something, I did check the live on the fuel harness which is OK.

I changed the Squirts Per Engine Cycle from 2 to 6 and it did found a little different when trying to start but still not luck.

I found a post form another member showing there working settings for Priming Pulse, Cranking Pulsewidth, Afterstart Enrichment, ASE Taper Cycles and Warn Up Enrichment (WUE).
There settings where a little different to the original FrakenCIS settings so I tried them, but still no luck.

I will post images af all my settings and would appreciate anyone that have MS2 working to have a look see and advise on anything that maybe incorrect, thanks.
1980 SC Flatnose, Euro 3.0, LW Flywheel, 993 Cams, Port & Polish Heads, RS Cut Valves, MSD 6AL, Blaster Coil, Magnacor Leads, Boxster Brakes, WEVO Mounts, TRG Roll Bars, Rollcage, RSR rear fenders, OE Short Sift, K27 7200 Turbo Conversion, OBX Headers, Tial Wastegate, EFI MicroSquirt v3

Last edited by gavinc69; 03-12-2016 at 10:21 AM..
Old 03-12-2016, 09:59 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #298 (permalink)