Pelican Parts Forums

Pelican Parts Forums (
-   911 / 930 Turbo & Super Charging Forum (
-   -   Twin Turbos for Your 930 (

RarlyL8 06-21-2010 06:50 PM

Twin Turbos for Your 930
Shot a few pictures of a set of twin turbo headers we made for a client before shipping them away. I just love this setup and hope to do it with my own car in the near future.
The headers are of course the same equal length merge collector 321 units used for the 930 except they are mirror images. This set is for use with K16/K24 turbochargers. Love that old school 934/5 look hangin' the big balls out back!

torresmd 06-21-2010 07:34 PM

Very nice!!!

Flieger 06-21-2010 07:57 PM

Hmm, twins on a 934.5? :confused:

Porsche 934.5 Brumos Racecar_ 060 on Flickr - Photo Sharing!

RarlyL8 06-22-2010 04:11 AM

No, 934/5, meaning old school 934 or 935 style 930's. I use this as a generic term for that cool old school race car look. An example would be Gabe's Reaper.

Flieger 06-22-2010 09:50 AM

Ah, gotcha :)

jonesb930 06-30-2010 06:06 PM

Very Nice!

930gt-40r 07-01-2010 07:04 AM

Absolutely badass- will be availible with t-3 flanges?

Speedy Squirrel 07-01-2010 08:47 AM

The worst I have ever seen. Good for a laugh though.

carslutt 07-01-2010 09:10 AM

any pics of them on a motor?

DDDD 07-01-2010 05:49 PM


RarlyL8 07-01-2010 07:17 PM

Thanks guys this is fun stuff and I love being a part of anything that makes are cars more personalized and enjoyable.

You can put whatever flanges you want on them. We also make kits consisting of the headers along with tubing to make custom secondaries.

Yes I have a several pictures of these headers on my mule engine and installed on client's 930's. I'm definitely going to put a set on my car when time permits, seeing these bad boys peek out under the bumper looks cool as hell. I'll figure out an uncomplicated way to use this setup with CIS so the EFI guys won't be the only ones who can run with twins.

Jeff Alton 07-01-2010 08:35 PM


Originally Posted by Speedy Squirrel (Post 5432996)
The worst I have ever seen. Good for a laugh though.

Care to elaborate?

Schwarzeritter 07-01-2010 10:57 PM

Ooooo pretty yellow car!
Yellows one of those colors and if done right it's über bad! It's a cool set up. I like the exposed look. I'm one for yeah performance is important but a fast car should look good to and in part it's art. ^_^

Flieger 07-01-2010 10:57 PM


Originally Posted by Jeff Alton (Post 5434128)
Care to elaborate?

I think he forgot the green font.:rolleyes:

sundevil64 07-02-2010 03:59 AM

I like the intercooler too!

IDGAF27 07-02-2010 04:03 AM

Cool set up.
Any numbers on it?
Willingness to make more? Price range?

911nut 07-02-2010 05:41 AM

Twin turbos will be a different driving experience than a big single turbo; more along the lines of a n/a engine with boost being a little more progressive and available at a lower rpm. Gone will be that "light the JATO" feeling of a single turbo hitting hard at 3k rpm.

9dreizig 07-02-2010 06:26 AM

damn that is sweet Brian!! Who's yellow car is that ?? nice looking fat ass..

full quack 07-02-2010 07:03 AM

Damn it Brian...stop showing me photos of stuff I REALLLLLLY want, but in no way can afford!! This is way worse than being drunk at a full nude strip club...

RarlyL8 07-02-2010 08:48 AM

Please don't egg on the mean people Jeff, I'm here to have fun and enjoy the company of mature adults.

Yes these headers have been added to my line-up and are not special order. They are the same sell price as the 930 single turbo headers. If you want different flanges or flange orientation they will be included extra and not welded on as this should be done on the car to get the orientation you desire.

The yellow car is featured in another thread started by the owner. Another set is going on soon and that fellow will post as well.

The design for the twins is taken directly from my split plenum 930 headers. The split plenum units with dual waste gates are completely separate and merge at the turbo, making it essentially a twin turbo setup terminating into a single turbo.
I don't have any data comparing the split plenum setup with the twin turbo setup. It would really be impossible to do correctly as the turbos used are completely different. I plan to use stock 993 K16 turbos when I mount these on my car. You can pick a set up used for not much money. If memory serves I paid $300 for my set of K16's.
Once I put these on my car I can make a kit for anyone interested. I don't think we are looking at big money here after all is said and done. Probably less than $3K complete. I plan to run twin zorks with mine. That will sound sooooooo awesome!

All times are GMT -8. The time now is 07:27 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.