![]() |
|
|
|
Tinkering Pays!!
|
Speedometer Wiring?
Without posting a picture, I'm questioning the wiring of my speedometer. It used to work before I removed it while chasing another wiring issue under the dash... There are three wires that feed the speedometer: Red w/Black; Brown w/Red; Brown w/Red...
There are four posts on the top. As I look from the rear of the gauge from left to right, I have the following: 1. Red w/Black [Power] 2. Empty 3. Brown w/Red 4. Brown w/Red Q: Is this correct? and, how do I differenciate between the two Brown w/Red wires? Or, does it matter cuz they do Ohms for the speedo?
__________________
LIVN80S - - Red '79 Porsche 930 Steel Slant Nose Conversion [in 1987] w. 46k miles 3.3L; 964 Cams; K27HF @ 1.0 BAR, with Garrettson Intercooler; Rarly Zork; CIS Flowtech Fuel Head & BL-WUR. |
||
![]() |
|
Registered
Join Date: Dec 2004
Posts: 736
|
Here is a good thread regarding speedo wiring:
Electronic Speedometer Wiring |
||
![]() |
|
Tinkering Pays!!
|
yes, that helped - thanks!
__________________
LIVN80S - - Red '79 Porsche 930 Steel Slant Nose Conversion [in 1987] w. 46k miles 3.3L; 964 Cams; K27HF @ 1.0 BAR, with Garrettson Intercooler; Rarly Zork; CIS Flowtech Fuel Head & BL-WUR. |
||
![]() |
|
![]() |
Thread Tools | |
Rate This Thread | |
|