|
|
|
|
| Author |
|
|
Registered
|
Hoses and Wires...
In my endevours to clean up , change the clutch and fix the oil leaks, ...I am finding wires and hoses that seem to have no place to go....
The first one I have to ask about is a rubber hose coming off of the top of the waste gate....this one was found coming up to the engine compartment and ziptied to the fuel lines going to the back of the compartment.....Where does this go and what is it..?
__________________
Signature Phrase " CATCH ME IF YOU CAN" 1988 Porsche 930 "Squerly" Built by "Porsche Doc" -------------------------- 1974 Porsche 911 (2003 - 2012) 2000 Boxster S (2006 - 2008) |
||
03-05-2012, 04:56 PM
|
|
|
Registered
Join Date: May 2008
Posts: 1,144
|
The top hose connection on the wastegate is for venting to atmosphere. On my stock wastegate the top hose (actualy it is a hard line) goes through the engine tin, does a turn down and vents.
__________________
'87, Modified WUR, Billet valve, 965 downpipe, Kokeln intercooler, GHL headers, Garrett T04B K27 hybrid, Tial w/.8 bar, WEGO IV, RarlyL8 dual out, LSD |
||
|
03-05-2012, 05:20 PM
|
|
|
Banned
Join Date: Nov 2007
Location: Rockwall, Texas
Posts: 8,559
|
That is the vent for the waste gate and must stay open to atmosphere . . . the factory ran it up and into the engine compartment to try and keep it out of the dirt and water of the road . . . in original trim, there was a curved metal pipe that passed through the engine tin . . .
Last edited by Ronnie's.930; 03-05-2012 at 05:28 PM.. |
||
|
03-05-2012, 05:23 PM
|
|
|
Registered
|
Cool...
Cool...Thanks...
I will send photos of the rest...
__________________
Signature Phrase " CATCH ME IF YOU CAN" 1988 Porsche 930 "Squerly" Built by "Porsche Doc" -------------------------- 1974 Porsche 911 (2003 - 2012) 2000 Boxster S (2006 - 2008) |
||
|
03-05-2012, 05:28 PM
|
|
Track Car
Squerly
