Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > 911 / 930 Turbo & Super Charging Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Registered User
 
IMR-Merlin's Avatar
 
Join Date: Oct 2010
Location: Southern NH
Posts: 3,680
Roll cage advice

I am looking for some input for a full weld in cage. Is there anyone that offers a kit? I have the ability to bend and weld my own, but having a precut cage would save some time.
Old 05-04-2011, 08:04 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Registered User
 
Jeff Alton's Avatar
 
Join Date: Jan 2003
Location: Langley,B.C.
Posts: 10,148
Rothsport has a GREAT kit. You need to trim and notch the kit, but it is pre bent and fits right tight to the tub. 750.00

Have worked with two of these, they are great.

Welcome to Rothsport Racing - Chassis Products
__________________
Turn3 Autosport- Full Service and Race Prep
jeff@turn3autosport.com
997 S 4.0, Cayman S 3.8, Boxster 2.7, Boxster S race car, 996, 955 Cayenne TT, 958 Cayenne TT
Old 05-04-2011, 09:37 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)
Registered User
 
kinein's Avatar
 
Join Date: Mar 2011
Location: inland empire
Posts: 2,839
Garage
Send a message via Yahoo to kinein
Autopower Industries - Application List
Old 05-04-2011, 10:18 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)
Registered User
 
IMR-Merlin's Avatar
 
Join Date: Oct 2010
Location: Southern NH
Posts: 3,680
Quote:
Originally Posted by Jeff Alton View Post
Rothsport has a GREAT kit. You need to trim and notch the kit, but it is pre bent and fits right tight to the tub. 750.00

Have worked with two of these, they are great.

Welcome to Rothsport Racing - Chassis Products
Looks like exactly what I am looking for. I will be doing some additional gusseting and cross bracing, it's just easier if the bends are already done, thanks for the link,

Brendon
Old 05-05-2011, 10:53 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)
porsher
 
aston@ultrasw.c's Avatar
 
Join Date: Oct 2007
Location: Tucson, AZ
Posts: 1,512
Garage
Quote:
Originally Posted by IMR-Merlin View Post
Looks like exactly what I am looking for. I will be doing some additional gusseting and cross bracing, it's just easier if the bends are already done, thanks for the link,

Brendon
Did you go for it, how did it work out?

Feedback and pics would be great!!
__________________
86 911 Carrera, with a few 993 bits in the boiler room.
Old 12-07-2011, 04:29 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #5 (permalink)
Registered User
 
IMR-Merlin's Avatar
 
Join Date: Oct 2010
Location: Southern NH
Posts: 3,680
I ended up going a different route and investing in a tubing bender and tubing notcher...

Here is a link to my work so far.

Starts about 1/2 way down the page.
new member 930 project
Old 12-07-2011, 04:46 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)
 
Reply

Thread Tools
Rate This Thread
Rate This Thread:

 


All times are GMT -8. The time now is 08:07 AM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.