Anyone have a small throttle rod

[ertech]

hi guys I misplaced the little throttle rod that goes fom the block to the TB
I know I will find it some day
Anyone have a used one for sale?
Thanks

[kenikh]

Too small to be useful, even in this case.

In all seriousness, these use standard ball ends and rod stock. If in a hurry, most local shops probably have some lying around. They are not expensive parts.

[kenikh]

Here's the part number for the ends...Pelican has them;

911-423-147-00-M100

[ertech]

This rod is flat in the middle and has a special angle

[Rawknees'Turbo]

While Paul and Kenik sound like the hands-on () authorities for rods of all shapes and sizes (), I know which rod you are talking about ertech, and it is available new from Porsche.

Also, I know from experience that you can replace the flat rod with a more conventional, round rod design and it works perfectly. About 7 years ago, I was in a hurry and did not want to wait on the order, so made my own link rod out of round bar stock that I bent to shape and threaded the ends to accept the appropriately sized ball cup () joints - has worked perfectly for about 7 years and thousands of miles. There is not much force on that rod (); all the force is on the much longer ), bellcrank rod prior to it, so do not know why Porsche thought that they needed that fancy, flat thing. . .

Available through Pelican ---->

Pelican Parts - European Automotive Parts and Accessories - Porsche • BMW • Mercedes • Volkswagen • Audi • Saab • Volvo • MINI


Part is on page 54 of the PET --->

http://www.porsche.com/all/media/pdf/originalparts/usa/911_USA_87_89_KATALOG.pdf

[icemann427]

Originally Posted by Rawknees'Turbo

While Paul and Kenik sound like the hands-on () authorities for rods of all shapes and sizes (), I know which rod you are talking about ertech, and it is available new from Porsche.

Also, I know from experience that you can replace the flat rod with a more conventional, round rod design and it works perfectly. About 7 years ago, I was in a hurry and did not want to wait on the order, so made my own link rod out of round bar stock that I bent to shape and threaded the ends to accept the appropriately sized ball cup () joints - has worked perfectly for about 7 years and thousands of miles. There is not much force on that rod (); all the force is on the much longer ), bellcrank rod prior to it, so do not know why Porsche thought that they needed that fancy, flat thing. . .

Available through Pelican ---->

Pelican Parts - European Automotive Parts and Accessories - Porsche • BMW • Mercedes • Volkswagen • Audi • Saab • Volvo • MINI


Part is on page 54 of the PET --->

http://www.porsche.com/all/media/pdf/originalparts/usa/911_USA_87_89_KATALOG.pdf

That Rawknees is sure nice...And knowledgeable. Reminds me of somebody else...

[Rodsrsr]

Ronnie would have been all over this one.

[krasuskyp]

Ronnie whonow?