best engine build tutorial ever.
 

https://www.facebook.com/1928617693945269/videos/2022898121183892/

rawknees just looping this at the 53 second mark. take the train ronnie

Nice Video....... But.... who is making those rocker arms???http://forums.pelicanparts.com/uploa...1500418657.jpg

Great video, thanks for sharing!

That'll be Jeff putting his engine together, hehe, take the train Jeff, enjoy watching your weekly videos, keep up the good work

Someone who made them about 1/2 " too short?
Alan

It's just the angle of the pic. And the rocker isn't in its final installed place.

no shaft at all.

Ah yes - had to be an explanation - no shaft. Nice strong looking rocker.
Alan

That's Magnus Walker's 2.5 SRT engine being assembled by Wicked Sixes. It made nearly 300hp on premium pump gas.

Is this a setup for you know who?

:confused::confused::confused:

Boob juice = the bestest assembly lube ever!!!


I always suspected that T77 was a nasty, naughty man!!!

I believe those rockers are made by Ninemeister in the UK.

Great Video!!!

Rockers
 

Sold by Ninemeister - not made ...

Servus Edelweiss

Just checked your Page, not much Porsche there, except 924 camshaft... Any other source to see what you are selling?

Subscribed...

Turbocraft also has a full 930 series on youtube that includes videos of engine disassembly, assembly, and 930 trans repair...

There are some other videos of a full engine rebuild too...

Its not step by step, but gives you a real good idea of what it involves...

Having access to videos like this is priceless, it speeds up the process 10 fold...

Hallo proffighter,

I visited the Edelweiss shop in Germany and it was very interesting. Here you can see a bit of his
work.

http://forums.pelicanparts.com/porsche-911-technical-forum/806515-shop-tour-edelweiss-germany-danger-addiction.html

I hope it helps.

G

Thank you!

Edelweiss Motorsport
 

Servus auch Roland,

when it comes to Porsche cars, engines and gearboxes there is more or less everything available from us.

From n/a to turbo and air to water cooled.

Our expertise is:

Camshaft
Valve train
Cylinder head - port / seat design
Crankshaft
Conrod
Piston
Exhaust
Inlet plenum
Mfi
CIS
EFI
Turbo build, upgrade and rebuild

Gearboxes and diffs

Suspension - 935 front axle etc.

We will have a new homepage this year ... so full with work ...

You find some pictures and stuff on facebook.

If I can be at your service feel free to call at any given time: 0049 1725428509.

Best reg.

Dirk

Hi Dirk

Thanks for update. For now, I am only watching what's on the market, but in the future I may contact you. Not progressing fast on my built as you probably have seen already...

Roland