![]() |
|
|
|
Registered
Join Date: Oct 2015
Location: Eastern Pa.
Posts: 695
|
Custom fuel rail Need a 13 mm Bosch Injector Drill/tool
It is a big ask ,but I am wondering if anyone has the Bosch 13 mm diameter tool/bit that I can borrow to drill the new fuel rail injector ports?
The current fuel rail in my 3.6 L conversion utilizes rated rubber fuel line in between the injectors. I want to use solid aluminumTo upgrade them. The injector bong diameter In the KM ass existing fuel railis 13 mm dia , And the injector spacing is 117.16 mm which I have laid out on the roster engineering fuel rail blanks below ![]()
__________________
1979 SC 1986 Carrera 3.6 L+ |
||
![]() |
|