Anyone have dyno of 3.8 with GE100 cams?
 

If you happen to have the above, would you mind posting? one going to 8k would be great.

Since noone chimed in yet, I'll share what I've found. I have been interested in the same question for a 3.5L race motor I'm planning to rebuild this winter, and want to put some hotter cams in. I picked up a pair of Elgin 324/304, similar to GE100. I found a dyno chart showing a 3.6 or 3.8 with GE100s, power peaked right at 8000. This would mean revving past 8000, which may be higher than I want to go for a big motor. I looked again now and couldn't find the chart, maybe in one of the later editions of Bruce Anderson's book?

Have access to one of the newer editions of B. Anderson’s book this week, and found the dyno graph I was thinking of.


http://forums.pelicanparts.com/uploa...1577159641.jpg

What book is that?

Bruce Anderson’s performance guide

https://www.pelicanparts.com/More_Info/BK145389.htm?pn=BK-145389&gclid=EAIaIQobChMI8ZS99trd5gIVDdVkCh2DcwEjE AQYAiABEgJOd_D_BwE