Baseline Weber jetting for altitude
 

Starting with a stroked 2.2-2.4 with 2.2 S pistons and S cams. Ported to S specs.
I am finishing up the rebuild of the Weber 40 IDAs and have 32 and 34 chokes available,
Short and tall aux venturies. I live at 8200 ft and drive between 5000 ft and 9000 ft.
Looking for suggestions on "baseline setup". I have my own preliminary setup in mind,
but am looking for additional setup suggestions for main, idle, air correction and emulsion tubes for running both 32 or 34 chokes. Thoughts?

TIA

Speedo

I am rejetting my Weber 40IDF for my elevation in Denver Colorado. I have discovered some information for flying yet nothing for height. Sarkari Result Pnr Status 192.168.1.1