2.7 CIS engine rebuild question
 

I'm looking at refreshing the 2.7 CIS engine on my 911 Carrera 75.
The car is in Switzerland so I was wondering who would you recommend either in Germany, Austria or Switzerland to do the job properly. I do not want to go to Porsche Classic but do not want to do this with an amateur. Whoever takes on this needs to understand this particular engine and the K-Jetronic issues since I would like to upgrade the engine to extract max power as recommended by this article

https://www.pelicanparts.com/techarticles/911_engine_rebuild/911_engine_rebuild2.htm

Thanks everyone for your tips and recommendations.

Give Lothar a call @ 41 32 387 20 70

Eggenberger Motorenbau.

They are in Switzerland. We do a reciprocating business with them. They are one of the best.

Tell him Neil sent you to him.

Neil
Performance Developments

Thanks Neil

Tell Lothar what you have what you are after in the way of performance. Things have come along way since that article was written. Even then, it was outdated with what some of us had to offer, back then.

Lothar's company are at the sharp end of the industry, so listen to what he has to offer. We have cams that are far ahead of the "old" 964 design and Lothar can supply these for you along with other parts and services that they offer.

You are in good hands with Lothar. I don't recommend many in this business, but he is one of a few that I do.

Neil

Highly appreciate it your advice Neil, I have checked their website and they look amazing, plus they are 1 1/2 hour driving from home. Will report back once I contact him. Many thanks again.