|
|
|
|
| Author |
|
|
Registered
Join Date: Aug 2018
Location: Maryland
Posts: 2,267
|
SC cam reusable advice OR upgrade
Just pulled this out and before I start measure for tolerances I was wondering about this break down. Is it ok to use this as is? Does this deterioration require a regrind? Others have posted their used SC cams that look decent.
So should I regrind this and possibly the other - if in similar condition? Buy a good used set? $200 Upgrade to 964 cams or regrind to 964 spec? Going a budget build, but if I'm moving to EFI ITB and have to put money in the cams, can I just upgrade the cams to 964 and readjust timing keeping everything else stock? Sorry for the 2 parted question. 
__________________
83' Coupe - Ex-RaceCar 77' Targa Narrow Body - SC powered Copper Brown Metallic |
||
12-31-2021, 07:58 AM
|
|
|
Registered
Join Date: Oct 2008
Location: Nash County, NC.
Posts: 8,519
|
Nick, that’s from 35+ years of running
You’re still lifting the rocker with 90% of the lobe and of all the cam lobe pictures available, none show a total wipe lobe. Isn’t there a better place to spend money… Bruce |
||
|
01-01-2022, 05:36 AM
|
|
|
Registered
Join Date: Aug 2018
Location: Maryland
Posts: 2,267
|
I'm all ears Bruce.
Ok so I'm scrubbing the idea of the 964. So you are saying I can run em as is?
__________________
83' Coupe - Ex-RaceCar 77' Targa Narrow Body - SC powered Copper Brown Metallic |
||
|
01-01-2022, 11:26 AM
|
|
|
Registered
Join Date: Oct 2008
Location: Nash County, NC.
Posts: 8,519
|
If cost is a concern, note it and run it
Bruce |
||
|
01-03-2022, 12:22 PM
|
|
