Originally Posted by Bill Verburg (Post 11883891)

The 993 engine rear mounts have the ~1" spacers(see post above) that push the rear of the engine down by that distance,

For the last 20+ years it wasn't an issue because I had a great fabricator weld up an exhaust that raised the exhaust up far enough to not be a visual issue, the tips would still occasionally grind on extreme transitions but not enough to worry about.

This summer I rebuilt the engine and of course the old muffler blew out immediately.

I purchased a new Fabspeed RSR setup which I like very much but it hangs too low, the tips also need to be moved outboard by ~2" to fit the existing cutouts, but that's been handled.

If the 1" spacers can be eliminated or reduced to even .5" that would solve or at least alleviate the problem

It appears that the stock 993 tray which was modified a bit for use in the '76 chassis is the major impediment to elimination of the spacers.

I can modify the existing 993 tin, or purchase f/g designed for the purpose, In the interest of expedience and saving everyone some time I don't mind spending some $

Sheridan seems to have had what I need, Rebel seems to have the Sheridan pieces as well, but neither has responded to email or phone calls,

lastly it would be at least reassuring to me that I am on the right track w/ the f/g to raise the rear of the engine

Originally Posted by dgtlhybrd (Post 12029733)

anyone have any luck purchasing or contacting Damon? def hadnt had any luck lately getting in touch for tins

Originally Posted by dgtlhybrd (Post 12033675)

do you have any of damons sets in stock? or maybe could help facilitate the tins? havent had any luck reaching him

Originally Posted by Jeff Alton (Post 12035303)

Is there demand for shrouds and "tin". If so, we can produce if enough people are interested...

Cheers

Originally Posted by Jeff Alton (Post 12035303)

Is there demand for shrouds and "tin". If so, we can produce if enough people are interested...

Cheers

Originally Posted by dgtlhybrd (Post 12037068)

Im not sure how often people are looking here, but in my case: im really looking for a cohesive set that matches so i am sure there are lots of people like me out there who just want a one stop shop (with quality and fit in mind). The sheridan set is great for this as you can get all the pieces relatively easily (even rain hats and back dated heat) just the color of Sheridan is a tad bit too light for me and where i am going with overall colors. The fact that I can get all the pieces from sheridan easily makes it very enticing despite my color issue.


anyone have the stuff rothsport is selling? the color there isnt as nice as damons but close

Originally Posted by NickP (Post 12045794)

I think Damon’s shrouds are the best color. Here’s mine:

http://forums.pelicanparts.com/uploa...1689554027.jpg

Originally Posted by mikedsilva (Post 12045822)

beautiful motor!