Air Guide Cooling for 2.7 Build

[T Collins]

I would like to take advantage of as much air flow cooling as possible for my 2.7 build. I have the 11 blade fan, I made the Wayne Dempsey modification to the cylinder air baffles for an extra 10-15*F cooling and would like to know if the installing the 930 cylinder cover plates as shown in the picture is actually worthwhile or not. Thanks for any help.

[eastbay]

I put them in my last 2.7 build and I think they help a bunch.

[T Collins]

Thanks for the reply. I haven't been able to find anyone that included these in their build.

[Martinlassmann]

I install them, it helps. Even in Traffic Jam good cooling.

[jonesb930]

I've been told those are for full finned cylinders. I am unsure if they will still improve a standard cylinder. I would do more research. I added them as I updated to fully finned cylinders.

[jonesb930]

Here is a link to my build thread that I asked the same question in.

https://forums.pelicanparts.com/911-930-turbo-super-charging-forum/1133264-long-overdue-build-thread-3.html#post12091432

[Flat6pac]

Those are 930 part numbers but not used on the turbo 3.3 where there is no top fins, I don’t recall the finned C2 turbo cylinders.
Bruce

[T Collins]

Many thanks to all for your reply and Happy Thanksgiving!