Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   911 Engine Rebuilding Forum (http://forums.pelicanparts.com/911-engine-rebuilding-forum/)
-   -   Cam grinding video (http://forums.pelicanparts.com/911-engine-rebuilding-forum/194313-cam-grinding-video.html)

camgrinder 11-28-2004 02:57 PM
Cam grinding video
 
Here is a short video of my cam grinder in action. I am grinding a new billet cam.
http://www.drcamshafts.com/2/

walt 11-28-2004 03:16 PM
I always wondered how that was done. What controls the motion of the table, is it a master cam or cnc? Thanks for the post.

camgrinder 11-28-2004 03:19 PM
The Berco camgrinder uses a master plate. The 911 requires 4 seperate master plates to grind both camshafts.

juan ruiz 11-29-2004 09:25 AM
John

I see that you start on my new top secret cams ,humm:D :)

Nitrometano 11-29-2004 08:25 PM
Let me buy some platanutres and cerveza Medalla to watch the movie!!!!

MotoSook 11-30-2004 06:56 AM
Thanks for sharing John. Very interesting!

sprbxr 11-30-2004 08:41 PM
CAn you fix cams that are pitted on a few lobes?

camgrinder 11-30-2004 08:56 PM
Yes I can fix cams with pitting. If the pits are severe the lobes can be hardwelded.

aigel 11-30-2004 10:46 PM
Is this the new or new to you machine? That's awesome! I only have seen crank grinders in action so far and they are a lot slower and less exciting to watch. ;)

George

camgrinder 12-01-2004 05:38 AM
This is the new to me machine.
I agree, crank grinding is less exciting to watch or to do.


All times are GMT -8. The time now is 04:21 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.