Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   911 Engine Rebuilding Forum (http://forums.pelicanparts.com/911-engine-rebuilding-forum/)
-   -   Identifying undersize bearings (http://forums.pelicanparts.com/911-engine-rebuilding-forum/223081-identifying-undersize-bearings.html)

cstreit 05-24-2005 12:45 PM
Identifying undersize bearings
 
Gang,

I believe this motor I'm working on has .25 mm undersize main bearings. However I am having trouble finding an identifying mark. Any depth measurements for std 2.0L bearings?

Of course I'm going to measure the crank, but I had a few minutes to look over some parts and the question came to mind...

cstreit 05-24-2005 01:37 PM
Well turns out they are .25over and .25under...

Over-under bearings....

Don't see them listed anywhere... *sigh*


All times are GMT -8. The time now is 04:26 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.