![]() |
|
|
|
Registered
Join Date: Dec 2005
Location: Palo Alto, CA
Posts: 203
|
Tightening torque question
Anyone know the torque spec for the cam housing hollow bolts - that hold down the cam housing oil lines. I can't find this spec in either the workshop manual or Wayne's book. I'm guessing 25.8ft-lbs, but would like to confirm.
|
||
![]() |
|
Registered
|
i don't have the book in front of me but i know it's in there. I think it's under cam oil line adapter or something like that.
__________________
2007 Mazda 3 hatch 1972 Porsche 914 roller with plenty of holes to fix ![]() |
||
![]() |
|
Registered
Join Date: Dec 2005
Location: Palo Alto, CA
Posts: 203
|
The adapter is the part that screws into the cam housing and that the hollow nut screws into.
|
||
![]() |
|
Registered
|
I would guess it depends on if the oilline is new or not.
__________________
Magnus 911 Silver Targa -77, 3.2 -84 with custom ITBs and EFI. 911T Coupe -69, 3.6, G50, "RSR", track day. 924 -79 Rat Rod EFI/Turbo 375whp@1.85bar. 931 -79 under total restoration. |
||
![]() |
|