Pelican Parts Forums
Page 2 of 2 « Prev 1 2
Show 40 post(s) from this thread on one page

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   911 Engine Rebuilding Forum (http://forums.pelicanparts.com/911-engine-rebuilding-forum/)
-   -   Case Closed-through bolt and CR question (http://forums.pelicanparts.com/911-engine-rebuilding-forum/287884-case-closed-through-bolt-cr-question.html)

WERK I 02-18-2007 07:28 AM
Quote:
Originally posted by cgarr
Looks very nice!! One case half has a chanfer at the thru bolt, this is the side the nut goes on, (helps seal around the bolt thread) I put mine all in and tite without the o-rings then removed one at a time and put the o-rings on each, old 912 engine trick to keep the o-rings from grinding up when going tite, mine were also opposite the cooler too.
Excellent tip!
Has anyone ever chamfered the other side of the case to prevent the o-rings from tearing. Chris, I thought you were going to try this once on a future build. Any results?

Purkinjefibre 02-19-2007 08:36 AM
engine in car and running
 
Hi Vic, yes those are in for timing- now fitted with hydraulic tensioners.

Craig- that is an awesome tip- if only you posted a couple of months earlier...LOL

Well the engine is in the car and running-Tuning megasquirt is a fun experience... I'll post some more pics on the weekend,

slater
Brett

rs-vic 02-19-2007 01:10 PM
I would also like to do Megasquirt someday. Keep us posted.


All times are GMT -8. The time now is 11:23 PM.
Page 2 of 2 « Prev 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.