|
|
|
|
| Author |
|
|
Registered
Join Date: Jul 2006
Location: Huntington Beach CA
Posts: 3
|
Crank pulley bolt '82 SC
Hi,
Trying to remove the crank pulley, to get at the oil seal for r/r. Have tried heat, liquid wrench, and a 450# Makita impact driver. Bolt won't budge. Engine is IN. Is it left-handed thread? Other tricks? Thanks! Ben |
||
07-30-2006, 10:38 AM
|
|
|
Registered
Join Date: May 2000
Location: Los Alamos, NM, USA
Posts: 6,044
|
|||
|
07-30-2006, 02:48 PM
|
|
|
Registered
Join Date: Jul 2006
Location: Huntington Beach CA
Posts: 3
|
Crank Pulley Bolt
Thanks, Jim, for the quick response and link. Will sneak up on it again, maybe catch it at a weak moment. Ben
|
||
|
07-30-2006, 02:57 PM
|
|
|
Registered
Join Date: Jul 2006
Location: Huntington Beach CA
Posts: 3
|
Turns out electric impact drivers just don't have the 'shock' that an air driver has (and is needed to break the Durlock). Got a neighbor's rig and it surrendered. The 'bigger hammer' theory prevails. Thanks again.
|
||
|
09-08-2006, 09:39 AM
|
|
