|
|
|
|
| Author |
|
|
Registered
Join Date: Oct 1999
Location: Marietta, GA
Posts: 809
|
Intake manifold paint
What kind of paint was used on a carb intake manifold? I have used methelyne chloride paint stripper and glass beading and I have yet to get all the paint off!
Any suggestions for stripping these? Thanks, neilca |
||
02-24-2007, 12:59 PM
|
|
|
E-85 sippin drunk
Join Date: Jan 2002
Location: Warner Robins, GA
Posts: 1,554
|
My guess is that it is powercoat that was put on very thick. If so, just keep on glassbeading, it will come off. Or try sand, it's courser, and will take less time to take it off.
Brad
__________________
Brad...930 gt-1 racecar, increased displacement to 3.6L, JB racing Cylinders, JE 8 to1 pistons, stroked crank, Carrillo rods, extrudehoned 3.2L intake, full bay Bell I/C, GT-2 EVO cams, Rarly8 headers, GTX-3584RS turbo, twin plug, P&P heads, Link G4 EFi system, G-50/50 with LTD slip and oil squirters/oil cooler, zork tube, full race coilover system, with carbon fiber body, full cage, E-85 sippin drunk |
||
|
02-24-2007, 02:37 PM
|
|
|
Registered
Join Date: Oct 1999
Location: Marietta, GA
Posts: 809
|
Brad,
I don't think it is powder coat because the methylene chloride removes that easily. I suspect it is epoxy. And a darn good paint it is, now I am wondering why I started to strip it! |
||
|
02-25-2007, 06:19 AM
|
|
