|
|
|
|
| Author |
|
|
Registered
Join Date: Oct 2005
Location: O-side California
Posts: 157
|
One last Case sealing question
After looking at all the sealant threads i have not seen an image as to how to avoid the thru bolt hole that feeds the cams. I assume (don't want to if i don't have to) that you should not put Threebond on the portion inside the groove supplied in the case. Is that correct. Use locktight or nothing at all?
Thanks 022SPA 
__________________
O22$pa 70 porsche 911t 52 mgtd |
||
09-21-2007, 03:39 PM
|
|
|
Registered
Join Date: May 2003
Posts: 3,346
|
Actually you don't want any sealant in that groove at all. You should try to use a minimum amount of sealant around that groove. That groove is to allow oil that escapes the hole to escape back into the case and not leak to the outside.
-Andy
__________________
72 Carrera RS replica, Spec 911 racer |
||
|
09-21-2007, 06:59 PM
|
|
|
Registered
Join Date: Oct 2005
Location: O-side California
Posts: 157
|
I know everyone is in a hurry to seal the case at this point but has anyone snapped a picture of the entire case showing Threebond coverage?
__________________
O22$pa 70 porsche 911t 52 mgtd |
||
|
09-24-2007, 12:10 PM
|
|
