![]() |
|
|
|
Registered
Join Date: Feb 2001
Location: Chesapeake, VA
Posts: 149
|
'89 964 Alternator & Fan Housing
Got the alternator and fan assembly torn apart and need some advice.
The alternator bearings are chirping so I'm going to replace it. The fan hub bearing feels like marbles, so I'm going to replace that. I found the shroud has a small, hairline crack and a ridge along the crack. The fan blades have made contact with that high ridge and are a little worn. Below are some pictures. Note that I spent about an hour sanding down the ridge so it is not very visible anymore. The area of actual contact was just localized to the line of the crack. The shinny area is from my sanding. Can I reuse the shroud? If yes, should it be painted or coated? Can I reuse the fan? If yes, shoud it be painted or coated? Thanks! ![]() ![]() ![]() ![]() ![]()
__________________
Steve '89 Carrera 4 Last edited by sms1305; 12-02-2007 at 02:47 PM.. |
||
![]() |
|
Registered
Join Date: Feb 2001
Location: Chesapeake, VA
Posts: 149
|
Anyone have any worries about reusing the fan shroud?
__________________
Steve '89 Carrera 4 |
||
![]() |
|
Registered
Join Date: Sep 2005
Location: Winnipeg, MB Canada
Posts: 221
|
With new bearings I dont see why it would be a problem. I poweder coated my fan, and I had no clearance issues.
Kirk
__________________
1989 911 Carrera 4 (964) |
||
![]() |
|
newb.
Join Date: Feb 2001
Posts: 2,077
|
If you want to replace all that, I am selling my entire fan/shroud/alt assembly for 600.00 in the classifieds. My stuff looks great.
__________________
keith '75 RS/RSR-look | '73 CB750 | '70 TD250B r gruppe #436 |
||
![]() |
|
Registered
Join Date: Feb 2001
Location: Chesapeake, VA
Posts: 149
|
Done!
Thanks, guys. I had my fan and shroud coated. Installed it last night and drove home!!
![]()
__________________
Steve '89 Carrera 4 |
||
![]() |
|
Registered
Join Date: Sep 2005
Location: Winnipeg, MB Canada
Posts: 221
|
Looks great.
Kirk
__________________
1989 911 Carrera 4 (964) |
||
![]() |
|
![]() |