Cam Ideas for a Street 2.5L SS

[Danimal16]

OK all,

Need some insight on cam selection for a 2.5L short stroke. Here is what I have so far:

66mm CW Crank;
2.2L "S" rods;
Carbs;
90mm Mahle Pistons and Cylinders
CR should be about 9.5 to 9.8
2.7 RS Stock Cylinder heads and valves

What would be a recommended cam for this application that will spend 90% of its time on the street.

Thanks

[BURN-BROS]

Which Mahle 90's ? 10.3-1 for the 70.4 mm stroke?

I'd probably stick with a Mod S cam.

[Danimal16]

Originally Posted by BURN-BROS

Which Mahle 90's ? 10.3-1 for the 70.4 mm stroke?

I'd probably stick with a Mod S cam.

Yes this is the 10.3-1 90's.

Thanks for the recommendation.

[TimT]

Dr-60

[Phoenix-MN]

"solex" grind. I have a 2.5 built up just like what you want to do. Great combination for the street.

Paul