|
|
|
|
| Author |
|
|
Mo money = mo parts
|
How could my right sprocket be off 4mm???
I followed the method in Bentley. I subtracted my intermediate shaft to flange (7.75mm). I measured the left side and got 105.7 = 97.95 - good. I measured the right side and got 47.5 - 7.75 = 39.75. Huh? Spec is 43.75.
I did not recondition my camshafts, they are exactly as they came out. I have the thick washer (bevel in) and four thin. I must be doing something wrong, the discrepancy is huge. I don't have the Stomski tool, I have a decent straight edge and using the depth measurement tool on my venier caliper. Not sure what to do. Edit: Right side spec is 43.27.
__________________
Greg 86 Coupe (stock - pretty much like Butzi designed it) 65 Ducati Monza 250 & 66 Monza Junior (project) "if you are lucky enough to own a Porsche, you are lucky enough" |
||
03-13-2010, 11:53 AM
|
|
|
Mo money = mo parts
|
Warning: Idiot with straight edge is a lethal combination. I am good to go.
__________________
Greg 86 Coupe (stock - pretty much like Butzi designed it) 65 Ducati Monza 250 & 66 Monza Junior (project) "if you are lucky enough to own a Porsche, you are lucky enough" |
||
|
03-13-2010, 12:07 PM
|
|
|
Registered
Join Date: Oct 2008
Location: Nash County, NC.
Posts: 8,467
|
The right side has the flat out not the concave side.
Bruce |
||
|
03-13-2010, 02:51 PM
|
|
1986 Porsche 911
