|
|
|
|
| Author |
|
|
Registered
Join Date: Oct 2004
Location: minneapolis MN
Posts: 463
|
Reassembly of throwout Bearing on 915
Hi All,
Anyone able to show me a picture of the correct order of shims, spacers, and clips on the throwout bearing on a 2.7L 915 clutch? Is it just the spacer and locking circlip on the one side of the bearing? then the serrated washer and bearing on the otherside of the pressure plate? Please let me know as when I was disassembling mine it kinda went "Twaaaang!!" and I cant be sure of the exact order that the stuff came off! thanks in advance Nabil
__________________
'71 S track car, 2.7L & Webers forever! |
||
04-12-2010, 06:04 AM
|
|
|
Registered User
|
Hope this helps. #5, spacer (flat) #4, Spring Washer (ID edge faces TO bearing as shown in picture). #2 Thrust washer (groove side must face the snap ring. #1 Snap Ring.
__________________
Mark Jung Bend, OR MFI Werks.com |
||
|
04-12-2010, 03:02 PM
|
|
|
Registered
Join Date: Oct 2004
Location: minneapolis MN
Posts: 463
|
Mark that was exactly what I was looking for. Thanks a million!
Pelicans Unite. Nabil
__________________
'71 S track car, 2.7L & Webers forever! |
||
|
04-13-2010, 04:06 AM
|
|
1957 Porsche 356 A Coupe 2.7 Short Stroke
1972 Porsche 72 Coupe
