![]() |
|
|
|
Registered
|
Twin Plug Distributor Help
I recently bought (2nd hand - new) what I was led to believe, a JB racing twin plug distributor. But now it appears that is not the case. While I am sure it is fine and will work, I have no instructions, source of info or who's version this is? Any assistance is greatly appreciated.
![]() ![]() ![]() |
||
![]() |
|
Registered
Join Date: Oct 2003
Location: Central Fla
Posts: 1,864
|
distributor
Its not a JBR, we never used that type of advance system, it looks like a Jarvis built unit, post some side views and we'll see
Mike Bruns
__________________
The two most useless things to a driver are the braking distance behind you and nine-tenths of a second ago. |
||
![]() |
|
Registered
|
twin plug distributor
Here are some side views
![]() ![]() ![]() Not sure how to deal with advance, etc. |
||
![]() |
|
Registered
Join Date: Oct 2003
Location: Central Fla
Posts: 1,864
|
Dist
I would say it’s one of Dave Jarvis’s, Jarvis Tech, the advance mechanism is GM like the HEI, to control the curve there are kits for the GM stuff everywhere basically bushings to limit its movement and lighter or heavier springs to control the speed of the action , the trigger is typically a ford style magnetic just like MSD or Mallory uses available and reliable. It looks like a 2.0/2.2 distributor.
Mike Bruns
__________________
The two most useless things to a driver are the braking distance behind you and nine-tenths of a second ago. |
||
![]() |
|