Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > 911 Engine Rebuilding Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Registered
 
pr944may's Avatar
 
Join Date: Aug 2002
Location: PR
Posts: 204
Garage
Oil film on air filter housing

Can any Pelican guru help me on this;
Today I open the engine filter housing to check condition !!
I found a Little engine oil film in the housing, nothing mayor or filter was dry!
Any reason for this. please advice

engine oil should not pass the pistons rings right!
The druk pressure always is under 2. Never when start it goes up more than 2.


__________________
Albert
911 SC 1983 :
Old 10-08-2010, 05:35 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Registered
 
Join Date: Oct 2008
Location: Nash County, NC.
Posts: 8,499
The hose from the oil tank to the airbox, under the air filter is the supply of fumes off the tank. Any moisture and oil fumes that are in the tank will vent to the airbox. There is a hose off the bottom of the airbox that directs the oil off the top of the engine.
If you want to change the system, use the 78 and later oil vent hoses and the black boot that cross from the airflow sensor to the throttle body. The fumes go directly into the throttle body.
2 atm on a 2.7 is too little overall pressure cold or above idle. I would change the sending unit after making sure that the old sending unit is actually a 0 to 10 atm
Bruce
Old 10-08-2010, 05:53 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)
Registered
 
pr944may's Avatar
 
Join Date: Aug 2002
Location: PR
Posts: 204
Garage
Thanks for the advice! What is the oil sending unit have any picture! I,ll stay in touch with you for your advice if you dont mind.OK I ''ll send you pictures of nthe toy is complete original I am second owner and is ROW type in excdlent condition, I just use it everey bothr saturday!!
__________________
Albert
911 SC 1983 :
Old 10-08-2010, 06:14 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)
Registered
 
pr944may's Avatar
 
Join Date: Aug 2002
Location: PR
Posts: 204
Garage
This is my first 911
spedometer marks 180 miles
temp reads o- 170
druk up to 10 ( When Ihit it the presure when up naturally)
Has aluminium back arms
sc back flares factory welded
all suspension bars
all lether in axcellent cond
NO Power sateering, no power barkes, all manually(doors glases) no electric seats, up holstery seats manuallly, start fast, no runs grate ( only problem is no power barkes por power steering
engine 909-101 7R
PUT H5
I have but not install hidraaulic tensioners.
bouth oil restrictors but not install where recomended
change alt. fan fro 5 to 11 blades
every light function perfectly
no air condition
99% rust free
today I recieved the driver door post that has a perforation diameter as a cigarette
and planning to paint it has some minor scratches

__________________
Albert
911 SC 1983 :
Old 10-08-2010, 06:42 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)
Reply


 


All times are GMT -8. The time now is 09:35 PM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.