|
|
|
|
| Author |
|
|
Registered
Join Date: May 2005
Posts: 68
|
New Bearings
I am looking into splitting the case on my 3.0. If the crank and rod bearings look good, can I put new bearings and rod bolts in the leave it at that? Do I need to polish the crank and other stuff?
|
||
07-11-2011, 01:39 PM
|
|
|
Registered
Join Date: Jul 2001
Location: Portland Oregon
Posts: 7,007
|
You should have the rods resized if you plan on installing new bearings.
I always remove the oil galley plugs in the crank so I can thoroughly clean those passages and I follow that with a polishing.
__________________
Steve Weiner Rennsport Systems Portland Oregon (503) 244-0990 porsche@rennsportsystems.com www.rennsportsystems.com |
||
|
07-11-2011, 02:58 PM
|
|
|
Registered
Join Date: May 2005
Posts: 68
|
what do you mean by resize? Grind the crank? Also, can I put the old bearings back in if they all look good?
|
||
|
07-11-2011, 04:08 PM
|
|
