Motor FS: 3.8l TT ITBs Andial P&C's w/930 box & LSD 634hp 1 bar MoTeC M600
 

The baddest motor you could EVER buy. Over $29k in MoTeC, Over $120k in the motor

http://forums.pelicanparts.com/uploa...1319359250.jpg

http://forums.pelicanparts.com/uploa...1320422703.jpg

http://forums.pelicanparts.com/uploa...1320422744.jpg

http://forums.pelicanparts.com/uploa...1320422815.jpg

http://forums.pelicanparts.com/uploa...1320422856.jpg

http://forums.pelicanparts.com/uploa...1320422932.jpg


3.8 liter Andial P&C's approx 6k miles on the motor
MoTeC M600 ECU & sensors tuned by MoTeC Northeast (over $29k in the ECU support system)
935 headers created from 321 stainless from original 935 headers
Custom aluminum boost tubes to run back to IC in rear seat
Super light custom flywheel (Brand New)
TWM ITB's
Twin plug distributor-less ignition
Single Pulley Conversion
T4 hybrid turbos with .63 hotsides, super quick spool and freight train power
Custom Zork Tubes
Dual 46mm tial wastegates
Flame Ringed Heads
Porsche Motorsport valve springs
Modified C2 case with 8.5:1 compression
Custom cams from WebCam (old Eddie Bello spec grind)
634 rwhp 605 rwtq with old EMS
Currently tuned to drive like a kitten in traffic and around town or put down some serious power and spin the 345/35/19 rear slicks
Tilton 3 plate clutch with custom flywheel (hydraulic throwout bearing)
Transmission is a 4 speed 930 unit with Quaife limited slip

Motor & Gearbox in Wilmington, NC

Asking Price: $35,000 obo

If split between motor & 930 box: $4,000 for the box, $31,000 for the motor & full tuned M600 with all sensors, brain box & dual M&W ignition boxes

email: reaper@d-zug.us

Even though this is probably better placed in the classifieds, it's staying HERE! :)

What was your model for building this? Which 935? Or many of them?

I think he was looking at the SR-71.

He's got enough thrust to do Mach 3.5.

Dude, that was GREAT!!! Well played!

Max, I think the "sled" has a slightly higher top end! (But no doubt the car this came from would beat the sled to rotation speed! :))

I placed an ad in the classifieds but just in case anyone is thinking about building one - you can get this for nothing compared to what it costs to build.

This motor is amazing and I really don't want to sell it - but I am moving on to a new platform, and if it doesn't sell...i'll keep it for a crazy project.

If anyone has tech questions on a build of their own i'd be happy to answer questions etc.

Here's the sound of the motor on the dyno - super light flywheel & clutch assembly

935 K3 Tribute Tuning 3.8tt - YouTube

:eek:

wow!!!!!!