![]() |
|
|
|
Registered
Join Date: Aug 2011
Posts: 17
|
San Diego Machine Shop?
I just finished tearing down my SC motor this weekend. This is my first rebuild so I'm not sure who is a good machine shop to take the parts to here. Are there any recommendations?
A shop that doesn't mind spending some time with me since I don't have any experience would be great too. Thanks, scott. |
||
![]() |
|
Registered
Join Date: Mar 1999
Location: Des Plaines, IL USA
Posts: 79
|
Henry Schmidt at Supertec in Fallbrook, Ca? I think it's worthwhile to drive a bit to get the parts to someone that does this all the time. Check his website for pricing.
|
||
![]() |
|
Constitutional Liberal
Join Date: Apr 2004
Location: Seasonal locations
Posts: 14,567
|
The guys at Supertec are generally very helpful and do great work. Henry posts advise to engine builders on this forum all the time.
__________________
Jim “Rhetoric is no substitute for reality.” ― Thomas Sowell |
||
![]() |
|
E-85 sippin drunk
Join Date: Jan 2002
Location: Warner Robins, GA
Posts: 1,554
|
Neil Harvey at Performance developments in Costa Mesa... AMAZING knowledge and the stuff they create is jewelry!!!!!
performancedevelopments.com
__________________
Brad...930 gt-1 racecar, increased displacement to 3.6L, JB racing Cylinders, JE 8 to1 pistons, stroked crank, Carrillo rods, extrudehoned 3.2L intake, full bay Bell I/C, GT-2 EVO cams, Rarly8 headers, GTX-3584RS turbo, twin plug, P&P heads, Link G4 EFi system, G-50/50 with LTD slip and oil squirters/oil cooler, zork tube, full race coilover system, with carbon fiber body, full cage, E-85 sippin drunk |
||
![]() |
|
Registered
Join Date: Aug 2011
Posts: 17
|
Thanks for the advice guys. I'll give them a call.
scott. |
||
![]() |
|