|
|
|
|
| Author |
|
|
Racer
|
Flame ring / cylinder head gasket ID
I'm rebuilding a 993 RSR-esque motor, and I need an ID on the flame rings / gaskets that were used to seal the heads to the cylinders.
From what I understand, stock ones have grooves on both the cylinder side and the head side. The ones that we have found on the teardown are different; on the head side, there is a groove that they lie in, but on the cylinder side, they are flat. Does anyone know who made them or where we could source some replacements?  
__________________
Preston Brown Street: 2009 911 Carrera S Coupe | 2015 Cayenne S | 1995 Audi ÜrS6 (unicorn) 1965 356 C Coupe | 2010 F250 (support vehicle) Race: 1994 964 GT2/1 | Various 944s | 2016 Superlite SLC | 2007 997 Carrera |
||
03-06-2015, 04:14 PM
|
|
|
Racer
|
To answer my own question: These t-shaped flame rings were made by CMW.
__________________
Preston Brown Street: 2009 911 Carrera S Coupe | 2015 Cayenne S | 1995 Audi ÜrS6 (unicorn) 1965 356 C Coupe | 2010 F250 (support vehicle) Race: 1994 964 GT2/1 | Various 944s | 2016 Superlite SLC | 2007 997 Carrera |
||
|
03-08-2015, 05:36 AM
|
|
