Got the heads on Saturday, a/c is working overtime in garage, 1 pm Sunday. Too hot to start up the air mid afternoon. Monday. Honey do day til mid afternoon running around town.
Probably 7 am tomorrow, back at it again.
Thanks for asking,
Bruce

Have fun. Hope it goes well. Fire that puppy up.

Spent some time laying out the CIS on the jig. Tightened all the runners and injection lines.
http://forums.pelicanparts.com/uploa...1433343301.jpg

Cis scares me

Just make sure t he ohms on the warm up regulator are close, the center pin on the fuel distributor is smooth and not hung up, make sure the air bypass responds to 12 volts, and there is no air leaks.
Got a real problem...ask Tony.
Bruce

Ready to set the cams, check the rocker lash, close it up.
Bruce

http://forums.pelicanparts.com/uploa...1433455422.jpg

Cams came in @1.7 and 1.68 so it's good to lock down.
I have to wait for the fan and carrier to get back from powder coat but got the shroud on and the wire harness in place.
Injection installed and tight with all the 12mm nuts
Bruce

Pictures
 

http://forums.pelicanparts.com/uploa...1433596177.jpg
http://forums.pelicanparts.com/uploa...1433596214.jpg
http://forums.pelicanparts.com/uploa...1433596282.jpg
http://forums.pelicanparts.com/uploa...1433596312.jpg

Extremely helpful, thanks for posting. John

Bruce, thank you posting the pics of your progress. Photographs are always so helpful in going back together. I must have taken a 1000 pictures when I disassembled everything on my engine and I am finding I am referring back to them more and more as my engine gets closer to being back together.

3.0 finished
 

This is the finished product, will be posted for sale shortly
Thanks for following,
Bruce


http://forums.pelicanparts.com/uploa...1443210804.jpg
http://forums.pelicanparts.com/uploa...1443210839.jpg
http://forums.pelicanparts.com/uploa...1443210987.jpg
http://forums.pelicanparts.com/uploa...1443211036.jpg

Bruce,
Thanks for the the education. Looks great.