Cams 4/review & evauation

[82 sportsc]

I have 7 cams I would like evaluated by accomplished builder to make available for sale as follows:
-R&L S cams 74-77
-R&L T cams 70-72
-L T cam 70-72
-Solex cam 901 105 109 OR I would like to use this for my rebuild of my 2.2 engine and if possible re-profile my single L cam as my set.
So I would like someone to confirm the condition of all cams and proper profile , as would like to sell all cams except the Solex.
Please let me know if you can assist and budget cost for this work

Thanks
Frank

[82 sportsc]

Anybody who can assist with condition of these cams...
Thanks for assistance
Frank

[camgrinder]

If you can take some measurements, (2.7 cams base circle diameter should be 1.230" +/- .010" and the T cams 1.160" +/- .010") list the casting numbers and the letters on the nose of the cams, I can tell you what they are no problem. The years and type of cams don't go for much money unfortunately. Obviously the solex cams have some value. I might have a matching 901105110 01 to match your left bank Solex.

[82 sportsc]

Thanks have sent you a note,and will check info you requested
Regards
Frank

[camgrinder]

Originally Posted by 82 sportsc

Thanks have sent you a note,and will check info you requested
Regards
Frank

Replied.