Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   911 Engine Rebuilding Forum (http://forums.pelicanparts.com/911-engine-rebuilding-forum/)
-   -   Stud Study (http://forums.pelicanparts.com/911-engine-rebuilding-forum/950193-stud-study.html)

Forrestkhaag 03-20-2017 11:48 AM

Stud Study
 
Does anyone out theere know the thread pitch and diameter specs for the case stud on a 3.0 / the one on top of the engine opposite the starter? I am mating a 901 box to my 82 3.0 engiine and that stud does not even get out of the three inch deep tranny bell housing metal. I would like to buy the correct thing first time.

thankshttp://forums.pelicanparts.com/uploa...1490039089.JPG

Flat6pac 03-20-2017 02:37 PM

That stud is 10 X 1.5 x 102
With a 901 transfer s the factory used an Allen head bolt there and it has to be long enough to attach the starter too
Bruce


All times are GMT -8. The time now is 09:45 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.